| PRODUCT DATA SHEET |
|
|
|
Maple Leaf Sales II, inc.
Middleville, Michigan
PRODUCT IDENTITY: K-GRIP 703 Premium Foam, Fabric & Trim Spray Adhesive
|
| DESCRIPTION
A fast tack, fast grab, low soak-in adhesive that is especially formulated to bond dissimilar and hard to bond substrates. It may be used for either permanent or temporary bonds and used to bond carpet. It is ideal for label applications. Comes with a 3 way adjustable tip that allows varied spray volume.
|
BENEFITS
- Long open time
- Low soak-in
- Forms Flexible Bonds
|
- Soft glue line
- Replaces 3M 74
|
APPLICATIONS
- Wood
- Foam / foam pads
- Fabric
- Supported vinyls
- Paper
- Leather
|
- Metal
- PVC
- Carpet Backing
- Polysheeting
- (not for use with unsupported vinyl)
|
HANDLING
- Store away from direct sunlight
- Maintain temperature below 120 F
- Do not puncture, incinerate or discard in compactor
- Store away from heat, sparks, flames and sources of static discharge
- Consult MSDS before use
|
SPECIFICATIONS
- Solids: 20% +/- 0.5%
- Heat Resistance: 130 F
- Color: Water white
- Clean-up:
K-GRIP 710
- Container Size: 20 Fl. Oz., 13 Oz. (net)
- Shelf Life: 1 year from manufacture
|
- Solvent: isohexane and ketone (acetone)
- Base: synthetic resin(s), styrene butadiene copolymer mixtures
- Flammability: extremely flammable
- Bonding Time: 15 seconds to several hours
- Resistance (oxidation, moisture, UV): good
|
| NOTICE TO PURCHASER: The information, data and suggestions for use of the materials given here are based on our best experience and knowledge, but we do not guarantee the results to be obtained in customers processes. The products discussed are sold without any warranty regarding merchantability or fitness for a particular purpose or any other warranty express or implied. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential arising out of the use of or the inability to use the product. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Since the seller of the product described in this technical data sheet has no means of controlling the final use of the product by the consumer or user, it is the responsibility of the immediate purchaser to inform the user of the purposes for which the product may be fit and suitable, and of the properties of the product including the precautionary measures which must be taken in order to insure the safety of the user and of other third persons and property. |
